GARDEN BENCH - PART III

The cocunut tree trunk is then shaped by a plainer and kept in the V of the two X es.

GARDEN BENCH - PART 2

Once the two lap joint supports are over,

 Support is needed to make it rigid when the wooden log is to be seated. The wooden pieces cut to the proper size should be screwed if one wants to make it portable or nailed if it is required to be made permanent garden fixture.

After this finish it with Plainer. 

GARDEN BENCH - PART 1

Lets make a Garden bench - Take a half cut coconut tree trunk of suitable length. (in South India we can get them enough). Get suitable wood pieces of size around 3 inches by 2 inches by 24 inches.

Cut them and make half lap joints as these ones.  Plain it with paining machine. 

While making joints use Chisels of half inch or one inch. care should be taken while joining to wood pieces with more than 60 deg angle between them. 

Make two Xsess and finish it with wood filings and fevicol paste