Make a plan. Get the angle iron welded as per the plan. Typically it should not be less than 6 feet in height and 6 feet in breadth. Length can be as per the available space. The welded angle frames should have about 5 cm holes at the top horizontal angle iron and 10 mm holes for anchoring the frames by nails to the side walls.
Mount the frames with nails. use steel wire to anchor it also the same steel wire would give support to the cladding. Mount the frames. Notice the mounting on walls and the steel wire support in the pictures.
Buy a 70 percent or 50 percent shade green. it is aroung 50 Rs a meter. Spread the cloth over the steel wires covering the frames. Take a big needle (सुवा) and sew the cloth so that it covers the frames and gives the shade as required.
The garden shade is here.
COMPLETED SHADE
No comments:
Post a Comment